Ftth Equipment ODF Fuse Tray FTTH Optical Splice Tray 12 Cores 24 Cores

Ftth Equipment ODF Fuse Tray FTTH Optical Splice Tray 12 Cores 24 Cores

1, for optical fiber fusion, branch;

2, cover can be flipped, disk can be superimposed, expanded capacity, installation, use and convenience.

Optical wiring products, plastic accessories fusion plate is combined in the optical cable junction box, part of the optical cable fiber and tail fiber fusion for continuous scheduling, the other part of the direct docking with other optical cables (direct melting). The fusion plate is for each optical fiber, connected to each other at will, with the use of. The fusion disk is combined in the optical cable transfer box. One part of the optical cable is connected with the tail fiber for continuous dispatching, and the other part is connected directly with other optical cables (direct melting). The fusion plate is for each optical fiber, which is connected to each other at will and coordinated with each other. Use. The fusion plate adopts high strength engineering plastic injection molding, flame retardant, high strength, long anti-aging time and so on.

1, modular design, unit box set optical fiber fusion, disk storage, wiring as one, each fusion module can be extracted separately to meet the off-shelf or in-rack operation;

2, optical cable, tail fiber, jumper management level is clear, has good maneuverability; can be applied to install FC,SC and other adapters;

3, working temperature:-5 ℃ ~ 40 ℃, relative humidity: ≤ 85% (30 ℃), atmospheric pressure: 70 ≤ 106Kpa;

4, nominal working wavelength: 850 nm, 1310 nm , 1550 nm;

5, insertion loss: ≤ 0.5 dB;

6, echo loss: PC ≥ 40 dB, UPC ≥ 50 dB, APC ≥ 60 dB;

7: electrical resistance: ≥3 KV (DC) / 1 min without breakdown, no flying arc;

8, insulation resistance: ≥1000 MΩ / 500 V (DC);

9, lifetime: ≥ 1000 cycles.

What is your quality control for your fiber optic product ?

1. Source Guarantee. We have our own long-term cooperation raw material suppliers. All the products are ROHS certificated and satisfy exporting quality level demand.
2. Quality Test. It runs through the whole process from the raw material to finished product, such as package, surface, physical test, optical test. They are 100% tested.
3. Optical Test. Our products are strictly tested in accordance with IEC and ITU standard.
4. We have 30% spot test by Quality Assurance Department after the products finished.